Tips for troubleshooting the alarm failure of the automatic glass edging machine

Due to our improper operation or incorrect use, the machine will sound an alarm. From this problem, we can know that it is necessary to stop the machine and find out where its fault is. The same is true for automatic glass edging machines. What is the troubleshooting method of the automatic glass edging machine alarm?

    Due to our improper operation or incorrect use, the machine will sound an alarm. From this problem, we can know that it is necessary to stop the machine and find out where its fault is. The same is true for automatic glass edging machines. What is the troubleshooting method of the automatic glass edging machine alarm?

1. AL007 motor overspeed alarm, first check whether the machine is stuck and whether the speed is overspeed 2. AL009 position deviation alarm, ibid. 3. AL006 overload alarm: check if the UVW power cord is connected correctly; check the machine.

4. AL011, AL024, AL028 use AL026 code signal to alarm, first check whether the motor parameters match, then check or replace the code line, and finally check or replace the motor.

5. AL003 (undervoltage) and AL002 (overvoltage) check whether the input power voltage is normal. If the exterior is normal, replace the driver.

6. AL001 over-current alarm, check whether the wiring state of the motor and the driver or the conductor is short-circuited, the wiring sequence of the motor and the driver, and whether the temperature of the radiator is abnormal.

 7.al004 motor matching abnormal alarm, check the motor and driver, if not set the corresponding drive parameters.

8.Al031 The u, v, w wiring error alarm of the motor, and the u, v, w, gnd wiring error of the motor power line, please contact the line, red (u), white (v), and black (w) on the motor output socket.