The method of cleaning the powder on the CNC special-shaped glass edging machine

The cnc special-shaped glass edging machine is one of them, so how should the powder on the cnc special-shaped glass edging machine be cleaned?

    With the continuous development of society, some unknown machinery and equipment have gradually appeared in our industry, but they have brought us a great influence, which makes our operation faster and faster, and also saves the enterprise from spending so much thought. CNC special-shaped glass edging machine is one of them, so how should the powder on the cnc special-shaped glass edging machine be cleaned?

    The glass edging machine grinds the corners of the glass into powder to make the glass smoother. However, a large amount of splashing powder is adsorbed on the glass edger every day. Therefore, the glass powder adsorbed on the glass edging machine should be reasonably removed after daily operation.

 Prolonged processing of the glass edging machine will cause cutting dust to adhere to the clamping shaft, chuck and the inner wall of the edging machine room. If it is not taken out in time, the lens will be scratched and the sealing ring of the clip shaft will wear out, causing water to enter the nose. It should be cleaned directly with a brush and a water spray container. Enter the machine cleaning mode for cleaning. This method can clean the water supply pipe inside the machine at the same time. When removing, it must be operated safely and reasonably according to operating standards. Because the glass edging machine rotates every day, its smooth maintenance is also a top priority. Always keep the mechanical shaft stable, so that the glass edging machine runs more smoothly. This can not only improve the working efficiency of the glass edging machine. And can also increase the output of enterprises. Due to your proper daily maintenance, the service life of the glass edger can be fully extended. Indirectly saves business costs.