Special-shaped processing skills of glass edging machine

Usually there are eight steps in glass special-shaped processing skills: They are blanking, forming, grinding, repairing, polishing, corner cutting, inspection and packaging. 1. The first step of special-shaped processing is to cut the material, and the material should be carefully selected, such as looking for blocks with good texture and suitable size. The machine generally adopts a disc-type glass edging machine. 2. The second step is forming, which means processing the shape of special-shaped glass. Among them, there are many kinds of contours of special-shaped stone, such as flower line, arc board, three-dimensional carving, stigma and so on. There are many equipments, such as advanced hydraulic profiling, photoelectric profiling, numerical control equipment, hand grinders, horizontal lathes, vertical lathes, drilling machines, etc. The tools used include diamond model grinding wheels, small-size diamond circular saw blades, diamond milling cutters, diamond drill bits, etc. 3. The third step is grinding, which means to perform fine grinding, fine grinding, and rough grinding again on the profile of the shaped workpiece. Generally speaking, the equipment is the same as the forming equipment. The forming equipment is used, and the forming tool is then converted into abrasive equipment. Some equipment is processed by a special grinding machine. Then use small electric tools to grind complex-shaped workpieces. 4. The fourth step is polishing processing. The method is basically the same as the grinding processing method. The difference is that the abrasive grain size used in the polishing processing is relatively finer than the grinding, so the polishing speed is relatively large. 5. The fifth step is to cut corners, which means to process the surfaces that need to be assembled. For example, when assembling with circular arc plates, use a double-cutter saw machine to process them into a fixed angle, which is roughly assembled into a circle. such. 6. The sixth step of inspection is to use the dimensional tolerance of the special-shaped stone to check the surface defects and gloss. 7. The last step can be packaged, usually wood or plastic products are used for packaging.