What should I do if the automatic glass special-shaped edging machine alarms?

       Gaomi Feixuan Machinery Technology Co., Ltd.    

      I believe that many customers will have encountered the problem of the alarm sounding of the glass edge reaching machine of unknown origin. In fact, these are minor problems. If everyone can find out the problem by themselves and solve the problem, then everyone There is no need to wait anxiously for the sales and service personnel of the machine manufacturer to come, and the production will be smoother. Let me introduce how to troubleshoot the alarm. 1. ALO07 motor overspeed alarm, first check whether the machine is stuck and whether the speed is overspeed. 2. ALOO 9-bit error alarm, same as above. 3. AL006 overload alarm: check whether the power line UVW is connected; check the machine. 4. AL011, AL0O24, AL028; ALO26 coding signal alarm, first check whether the motor parameters match, then check or replace the coding line, and then check or replace the motor. 5. AL003 (under voltage) and AL002 (over voltage) alarm, check whether the input power voltage is normal. If the exterior is normal, replace the drive, 6. AL001 over-current alarm, check the motor and driver wiring status or whether the conductor body is short-circuited, as well as the wiring sequence of the motor and driver, and whether the temperature of the heat sink is abnormal. 7. AL004 motor matching abnormal alarm, check whether the motor and the driver are consistent, if not, set the parameters of the driver to correspond to it. 8AL31 Motor U, V, W wiring error alarm, motor POWER LNE UNWGND wiring error, please connect the wires according to the color, red (U), white (), black (W)) in order, lock the three wires on the drive On the motor output base.