Precautions for installation and use of special-shaped glass edging machine

    With the rapid development of today’s industry, its development is inseparable from some training equipment, which can improve our production efficiency and work efficiency, and bring various effects. The special-shaped glass edging machine is the same, so What are the precautions for installation and use of the special-shaped glass edging machine?  

    The installation of the special-shaped glass edging machine requires that the ground is flat, and all angles of the machine must be level after installation, otherwise it will affect the processing effect. Ensure that the power is connected correctly, such as the special industrial voltage 415VS0HZ.2NVSOHZ.20/56H abroad. If the power is connected incorrectly, it may cause the motor on the edge mill or the electrical appliances in the electrical cabinet to burn.

Precautions for the use of special-shaped machines:

1. Whether the height of the suction cup of the working table of the special-shaped machine has a greater impact on the grinding effect. During the installation, the manufacturer has carried out self-grinding on the five sets of suction cup holders, and selected the suction cup glue with the same thickness to keep the height of the suction cups the same, so in general, do not disassemble the suction cups. If the suction cup glue is damaged If it is bad, you have to choose the one with the same thickness to replace it.

2. After the vacuum pump is used for a period of time, due to water intake and other reasons, the vacuum degree will decrease (that is, the suction force will decrease). On the other hand, it is prone to accidents.