Consulting Tel: 13375360937NEWS
|
|
What is the reason why the suction cup of the CNC glass edging machine cannot be sucked?The suction cup of the CNC glass edging machine cannot be sucked, which may be caused by the following reasons: 1. Check whether the suction cup is leaking. 2 The suction cup pressure is not enough, see the vacuum gauge, the pressure is above 0.08. 3. Check whether the accumulator is blocked, whether there is gas, and whether it is blocked. 4. Whether the cylinder is stuck and whether it is in place. 5. Check whether there is water in the water inlet of the vacuum pump and whether there is water out of the water outlet. 6. The vacuum pump is running. |
