How about the configuration of the double-sided linear glass edging machine?

    The double-sided machine of glass edging machine is divided into straight double rounded edge, straight double beveled edge, and straight double straight edged. Generally speaking, the double-sided machine generally refers to the straight double straight edged machine. How to adjust the linear double-sided glass edging machine? When processing offline LOW-E glass, the film on the edge of the LCW-E glass can be removed. This is a process requirement in LOW-E glass mixing. But the online LOW-E is unnecessary.

      The double-sided machine of glass edging machine is divided into straight double round edge, straight double beveled edge, and straight double straight edge. Generally speaking, the double-sided machine generally refers to the commonly used straight double straight edge machine, referred to as the double-sided machine. Since the two-sided machine has a bottom edge and two chamfered edges, the corresponding two-sided machine grinding wheels are also divided into two types: bottom edge wheel and chamfer wheel. Bottom No. 1 and No. 2 usually use diamond wheels, but bottom No. 3 and No. 4 have multiple wheel matching methods: 1) BK wheel + BK wheel; 2) Tree thumb wheel + water pine wheel; 3) Water pine wheel + water Loose wheels, etc., that is to say, No. 3 and No. 4 silver choose BK, resin, and water loose wheels to cooperate with each other according to the edging requirements. The grinding wheel on the bottom side is called a fine polishing wheel. The fine polishing wheel includes: X8000, X5000, X3000, CE-3, etc., according to the customer's processing requirements to choose the polishing brightness effect.

      For glass edging machines, the double-sided machine corners are usually equipped with only 2 grinding wheels on each side. The wheels for the two chamfering edges are the same, so only one side of the wheel: the chamfering edge No. 1 grinding wheel can be a diamond wheel, BK wheel, water loose wheel, for example, corner 2 wheel can be BK wheel, water loose wheel. As mentioned above, is it contradictory to have BK+BK on one side or the chamfered side No. 1 and No. 2 water pine and water pine wheel? In fact, professionals know that BK roughly subdivides BK46, BK60, BK80, BK120, BK180 according to emery. . So is the tipping wheel!. Therefore, using a rented Bk and then using a small BK is the normal and correct way to use it. There are no more than two factors for each wheel selection: one is the glass edge effect of the grinding; the other is the life (cost) of the grinding wheel, then choose according to your own needs!