Part of the operation steps of the special-shaped glass edging machine

       The function of the special-shaped glass edging machine is still better. How can I say it, because now the industry is constantly developing, in many aspects, there are actually many special-shaped glass edging machines used, and the special-shaped glass edging machine can Is it better to process some bad or special-shaped glass, and the number of special-shaped glass edging machines is still very large every day. In fact, it is still because many people don’t know how the special-shaped glass edging machine works. Kind of use.       1. it is to process some glass. Bijiaru said that you want to make it into different shapes at home, and the shapes will be different in these aspects, then the premise is that you need a staff who is more skilled in the operation, and then these The glass is processed, and the operation must be very careful in the process of processing. Each step cannot be dropped, and the accuracy of each step must be very high. In the process of so many processing, in fact, it is now shaped The damage of the broken glass edging machine is very small, and it is more convenient in operation. It should be done now. When changing the water, the current glass machine needs to unplug the power plug first, and then take out the water tank. , Drain the waste water, and clean the dust in the water tank and filter screen before proceeding.      2. Clean the sprinkler, because it is also to prevent the sprinkler from clogging, reducing the amount of water or no water, in this case the processing capacity is reduced or even unable to work. Therefore, when cleaning the spray nozzle, please unplug the nozzle and use a fine needle to remove the blockage inside the nozzle.