Introduction to the characteristics of glass edging machine

     The glass edging machine is one of the mechanical equipment that produced very early and used a large amount in the deep processing equipment of glass. Its product characteristics: The glass multi-stage edge grinding machine ZM9325-45% is based on the glass breaking straight edge machine ZM9325. The function of grinding multi-stage edges is added. The front chamfer grinding head can be electrically switched between 45 and 90 to realize the level edge. , The bottom edge and the back 453 tomb are processed in one time, so that the straight edge and multi-level edge can be processed in one time. main feature:

1. The base, beam, grinding head seat, etc. are good castings that are strong and stable, and the square beam is not deformed;

2. The grinding head motor adopts advanced special motor;

3. 2.2KW Jiali wide-range governor, Jiali worm gear box, longer transmission;

4. Conveyor chain transmission;

5. Thickened square tube rack can carry original thick glass processing;

6. The grinding wheel is super sharp, OasisNew, and the bottom polishing is imported 10S40, CE3 or SD001. The polished effect is as bright as a mirror;

7. The function of the oil pump to lubricate the grinding seat slide plate can easily adjust the grinding head up and down;

8. The function of ordinary straight edging machine plus multi-stage edging function, the glass edging machine that can be adjusted by 45°-90° arbitrarily;