Precautions for the use of slate edger

Stone is an inorganic non-metallic material that is widely used and widely defined. It can also be used in the fields of large-scale construction, household, method, grooming, etc., and the variety is very rich. In addition to the commonly used tempered glass, printing and dyeing glass periphery, as well as optical glass, dimming stone, etc., they are eager for higher grades of technology. In this article, we will introduce the precautions for the use of slate edging machines.

1. Precautions for the application of slate edging machine

 1. For all kinds of newly purchased slate edging machines, you must read the instruction manual before using it. After clearing the source of the transmission rules of the machine, the meanings of various handles, handwheels, electrical buttons, water channels, and air control valves, and mastering the knowledge of machine maintenance, you can operate the machine.

2. The grinding head of the slate edging machine has a great impact on the grinding effect of glass. The position of the grinding head, the position of the grinding head, and the after drinking and drinking have all been adjusted before leaving the factory. Except for the advancing and retreating of the grinding head, other The shape seems not to move, so as not to imperceptibly affect the grinding quality. In addition, the degradation of the grinding head is undoubtedly too large, otherwise it is easy to damage the waterproof cover, cause water seepage, and easily burn the motor.

3. Whether the refrigeration is sufficient also has a great influence on the edging performance of the slate. It is necessary to regularly check whether the refrigeration pipeline is free from the phenomenon. In particular, the pipeline of the linear edging machine is easy to be eliminated by the bristles, and it can not be detected after being blocked, which will lead to insufficient refrigeration to influence the quality of the edging.

4. The stepless speed changer used by the slate edger should be in the open state when adjusting the progress, otherwise the stepless speed changer of the edger will be easily damaged.