CNC machine tool glass processing center experience you need to know

Now many glass processing companies have used glass CNC machining centers. First, they are drawn with CAD according to the size of the glass to be processed. The placement of the glass during processing must be consistent with the position of the glass during drawing, so the center of the glass must be set as the origin when drawing. After the drawing is completed, the special software will convert the drawing drawn by CAD into a processable program.

Compared with metal processing, glass processing is much simpler and less complicated than mechanical processing. With the popularization of glass mechanization processing, my country will have a large market to develop. Although the development speed and scale of my country's glass machinery industry are now in the forefront of the world, most of them are concentrated in the low-end fields, and the technical level and added value are low. However, with the continuous development and innovation of glass machinery in my country's manufacturing industry, my country's glass processing center technology is relatively mature, and the future of the industry is the core competitiveness of products.

Before CNC glass processing, the equipment must be calibrated and returned to zero to check whether the air pressure meets the requirements of the equipment.

Precautions for CNC glass processing center:

1. When using a new tool, the tool code must be reset;

2. If there is an error in the size of the finished product, it may be caused by tool wear, and its parameters must be corrected;

3. When choosing a tool, pay attention to the feeding method and direction to avoid breaking the glass;

4. Be careful not to be too close to the working area during processing, so as to avoid harm to the human body during the operation of the equipment;

At present, CNC glass processing centers are mainly used in home appliance glass and automotive glass, and relatively few in architectural glass. However, with the improvement of the quality requirements for the appearance of architectural glass, the use of CNC machining centers is also increasing, mainly used in the processing of exposed corners and grooves, and the processing of special-shaped edges.