Introduction to the classification and daily maintenance of CNC special-shaped edging machines

Speaking of CNC special-shaped edging machines, I believe that friends who know more about glass will not be unfamiliar. Edge grinder is one of the key equipment to be prepared for glass deep processing. The performance of the edger also determines the quality of the product to a certain extent. Then, the daily maintenance of CNC special-shaped edging machine is particularly important. Now make some summaries on the classification and daily maintenance of CNC special-shaped edging machines for reference.

1. Guide rail and lead screw

From small size to large size, it should be automatically opened and closed at least once a day, or once per shift, and the oil pump will automatically fill with oil. Open the screw cover once a month, check whether the lubrication of the screw and guide rail is normal, and clean up glass powder and foreign objects.

2. Grinding head motor slider and main drive gearbox

Due to the constant presence of water, dovetail grooves should be lubricated at least weekly. If there are foreign objects such as water and glass powder around the dovetail groove, they should be removed in time to prevent rust and blockage. The upper and lower gearboxes should be opened for inspection once a month, the upper gearbox should be filled with grease, and the lower gearbox should be filled with the corresponding type of industrial gear oil to ensure that the oil can immerse the gears.

3. Compression Rack and Tank Brush

Rinse the wool brush with clean water at least once a day to prevent the wool brush from scratching the glass due to excessive glass powder condensation. Plastic pellets should be rinsed with clean water at least once a week to ensure cleanliness and flexibility of the pellets and to remove glass debris, etc.

4. The lifting mechanism of the compression frame of the CNC special-shaped edging machine and the main drive optical axis

The lifting mechanism should be opened once a month, the screw and nut should be filled with grease, and the nut and sliding sleeve should be filled with 30# oil to ensure the elasticity of the press frame. Before the end of each shift, use a decontamination cloth to wipe off the glass powder and other dirt on the shaft, and then apply 30# engine oil. Once per team. Open the mobile box to the middle of the hoistway every time after get off work.

5. Input end assembly and reducer of transmission mechanism of CNC special-shaped edging machine

Add 30# oil to the cylinder slide rail to ensure that the wheel slides forward and backward flexibly, at least once a day. 30# oil is added between the stainless steel lead screw and the wheel to reduce friction and enhance the flexibility of the wheel's rotation. The lubricating oil should be replaced after the first working week of the worm gear reducer, and every 3-4 months thereafter. The lubricating oil should use the specified industrial gear oil.

6. Electromechanical control part of CNC special-shaped edging

All electronic components and control circuits should be regularly inspected, cleaned and maintained.

CNC special-shaped edging machine-metal belt edging machine

For grinding and polishing of double-sided corners of metal coils.

Applicable materials: stainless steel, copper strip, aluminum strip and other metal coils.

CNC special-shaped edging machine-glass edging machine

Main function: used for grinding and polishing glass edges and corners.

Main features: It can grind various special-shaped edges such as rounded edges, straight edges, duckbill edges, etc., and is not limited by the length, width and size of the glass shape.

Advantages of the equipment: rough grinding, fine grinding, polishing, chamfering and other processes can be completed at one time. The frequency converter is used for speed regulation,