What are the efficient working factors of glass edging machine?

What are the factors for the efficient work of glass edging machines?1. For all kinds of newly purchased edging machines, you must read the instruction manual before using them.After figuring out the transmission principle of the machine, the functions of various handles, handwheels, electrical buttons, waterways, and airway control valves, and mastering the maintenance knowledge of the machine, you can operate on the machine.

2. The quality of the grinding head of the glass edging machine has a greater impact on the grinding quality of the glass. The position of the grinding head, the moving gap, etc. have been adjusted at the factory. Except for the forward and backward grinding heads, the rest generally should not be moved to avoid affecting the grinding quality.In addition, the backward position of the grinding head is not easy to be too large, otherwise it is easy to damage the waterproof sleeve, cause water leakage, and easily burn out the motor.

3. Whether the cooling is sufficient also has a greater impact on the grinding effect.Always check the cooling pipeline for blockage.In particular, the pipeline of the linear edging machine is easily clogged by bristles, and it is not easy to be noticed after blocking, which will cause insufficient cooling and affect the quality of the edging.

4. The stepless transmission used in the edging machine must be in an open state when adjusting the speed, otherwise it will easily damage the continuously variable transmission of the edging machine.

All preparations have been made in advance. The following, there may be other factors：

 1.Manufacturing (process) factors, although the design is correct, the equipment fails due to various failures due to the inability of the process manufacturing conditions to meet the design requirements.Such as cracks in the forging process; unsoldering in the welding process, looseness and slag in the casting of hot and cold cracks; dimensional tolerances and surface roughness of machining are not suitable; defects in the heat treatment process, such as quenching cracking, tempering brittleness, tissue defects in the hardened surface layer, insufficient hardness, and the hardened layer is too thin; finishing grinding cracks, etc.

1.There is a problem with the quality design of the glass edging machine.For example, although the technology of the edging machine is reasonable, due to the manufacturing conditions that cannot meet the design requirements, various failures of the equipment will lead to failure.Cracks in the forging process; the welding process is not welded in place, hot and cold cracks, pores and slag in castings; processing tolerances and surface roughness are inappropriate; defects in the heat treatment process, such as cracks, tempered and hardened surface defects, hardness, and the hardened layer is too thin; fine grinding cracks.So how should we choose the correct glass edging machine?Please click to view the precautions in detail.

2.The material selection factors of the edging machine, the materials used in the parts and components of the equipment do not meet the technical conditions, and the internal defects of the material are essentially the source of its internal stress concentration.Under the action of external loads, material defects exhibit high stress and cause some kind of failure.The failure caused by the material may be due to improper design and material selection; it may also be due to defects in the process of hot and cold processing of the blank (especially heat treatment), as well as due to improper installation and commissioning.

3.The factors for the operation and maintenance of the machine are first and foremost the monitoring of the operating condition parameters (load, speed, etc.) to see if they meet the prescribed requirements.In addition, lubrication conditions are also an important factor.Lubrication conditions usually include: whether the lubricant and lubrication method are selected appropriately, whether the lubrication device and the cooling, heating and filtration system functions are normal, which is also a daily maintenance problem of glass edging machines.