Special regulations for the maintenance of glass edging machines

       Special regulations for the maintenance and maintenance of glass edging machines. With the continuous development of science and technology, the glass cutting machine industry has great potential and broad market prospects. Let's talk about how to maintain it, hoping to help you extend the service life of the equipment.

　　1. Before the equipment works, it is necessary to ensure that the laser tube is filled with circulating water.When the glass cutting machine automatically flows into the water tank, open the water tank, take out the water pump, and remove the accumulated dirt from the water pump.After cleaning the water tank, replace the circulating water, then restore the water pump back to the water tank, insert the water pipe connected to the water pump into the water inlet, and organize the various joints.Power on the water pump separately and run for 2-3 minutes to fill the laser tube with circulating water.

　　Second, the fan is clean.Long-term use of the fan will cause a lot of solid dust to accumulate in the fan, which will cause the fan to produce great noise and is not conducive to exhaust and deodorization.When the suction power of the fan is insufficient and the exhaust is not smooth, first turn off the power supply, remove the air inlet and air outlet pipes on the fan, remove the dust inside, then turn the fan upside down, and toggle the blades inside until it is clean, and finally install the fan.