Stone edging machine is one of the more commonly used equipment in stone processing

Stone edging machine is one of the more commonly used equipment in stone processing. It is commonly used in some small and large stone product production companies. Choosing a good stone automatic edging machine also determines the quality of the stone and the quality and power of the stone processing products. The edging machine looks simple to operate, but there will be some small problems in the application. The balance lever is a problem.:

Automatic edging machines are widely used in the deep processing of stone frosted stone, and many other related mechanical equipment, such as vehicle balance bar equipment.The balance bar is usually a stone edging machine to prevent body deformation, stiffness, and torque conversion of the grinding wheel balance wheel, reduce losses, extend the life of the grinding wheel, reduce the collision of the grinding wheel, extend the stability of the adsorbent, prevent positioning and displacement, and maintain parts rationally.

The balance rod stone edging machine makes the operation more sensitive, the stone processing personnel easier, and the damage to stone processing with stable and safe starting and stopping levels is greatly reduced.With the implementation of society, stone products are becoming more and more common, which has fully stimulated the implementation of stone machinery, and stone machinery will continue to increase its speed to meet the growing demand.

Users who purchase stone edging machines may know that water-cooled motors are cheaper than air-cooled motors, but water-cooled motors are easy to damage, so what is the reason for the damage to the motors of the stone edging machines?

what?Below we will explain from many aspects.There are many reasons for damage, let's only talk about a few common reasons.

1.It is mainly the quality problem of the same service motor of the stone edging machine.Servo motors produced by small manufacturers are not guaranteed and may be damaged at any time, making it difficult to predict.Therefore, choose the same service motor and choose the brand.

2. There is a problem with the cooling system of the edging machine, which causes the motor of the same service to overheat, the bearing damage is aggravated, and the servo motor is physically damaged.Therefore, the refrigeration system needs to work normally before it can be used.

3.The operating system version used in the stone edging machine is too low or the system is imperfect, which leads to engraving before the speed reaches the requirements, resulting in excessive engraving resistance and damage to the engraving machine.

4.The antifreeze protection of the marble edging machine is not good.The engraving machine is a mechanical product.In winter, especially in some parts of our country, the temperature is too low, and the engraving machine does not take antifreeze measures, causing damage to the spindle of the engraving machine.