CNC machine tool glass processing center experience you need to know

Now many glass processing companies have already applied glass CNC processing centers. First of all, they are drawn in CAD according to the size of the glass to be processed.The placement of the glass during processing must be consistent with the position of the glass during drawing, so the center of the glass must be set as the origin when drawing.After drawing the drawing, a special software will convert the drawing from CAD into a processable program.

Glass processing is much simpler than metal processing, and it is not as complicated as mechanical processing.With the popularization of mechanized glass processing, our country will have a large market to develop. Although the development speed and scale of China's glass machinery industry are now among the forefront of the world, most of them are concentrated in low- and middle-end fields, and the technical level and added value are low.However, with the continuous development of China's manufacturing industry and the continuous innovation of glass machinery, our country's glass processing center technology is now relatively mature, and the industry will fight for the core competitiveness of products in the future.

Before CNC glass processing, the equipment must be corrected back to zero and the air pressure must be checked to meet the equipment requirements.

Precautions for CNC glass processing centers：

1. When using a new tool, the tool code must be reset；

2. If there is an error in the size of the finished product, it may be caused by tool wear, and its parameters must be corrected.；

3. When choosing a tool, pay attention to the feeding method and direction so as not to break the glass.；

4. Be careful not to get too close to the working area during processing to avoid harm to the human body during the operation of the equipment.；

At present, CNC glass processing centers are mainly used in home appliance glass and automotive glass, while they are relatively rarely used in architectural glass.However, with the improvement of the requirements for the appearance quality of architectural glass, the use of CNC processing centers is also increasing, mainly used in the treatment of exposed cut corners and grooves, and the processing of shaped edges.