The advantages of glass processing centers over linear glass edging machines.

Shortcomings of linear glass edging machine：

1. The movement of the glass wheel is unbalanced, if the glass grinding wheel moves back and forth periodically.In this way, the products processed by the glass edging machine will be uneven and wavy edges will appear.

(1) During the processing of the glass edging machine, the cutting force of the two pairs of edges is uneven.The clamping force is not large enough, which causes the product to move in the longitudinal direction, causing the wavy edges and opposite sides of the glass to be not parallel during the processing of the glass edging machine.

(2) The speed of movement on both sides of the product is not equal, resulting in the size of the head if the sides are not parallel.

(3) The gap between the beam adjustment screw and the adjustment screw is large, and when the centering mechanism is aligned, it is squeezed by the centering force.

Advantages of glass processing centers：

Therefore, Xiaobian recommends using a glass processing center (also known as a special-shaped glass edging machine) to process glass, because the processing method of a glass processing center is completely different from that of a linear glass edging machine. The glass processing center is directly processed by the circumference of the glass after the glass is opened, which may completely avoid the problem of diagonal error during glass processing (unless there is a problem with the accuracy of the equipment), and at the same time, one device completes the work of a linear edging machine + a glass chamfering machine, saving space and labor.