What details should I pay attention to when purchasing a glass edging machine?

As an essential machinery for deep glass processing, the glass edging machine is relatively large in appearance, so the price of the edging machine is relatively high.The prices on the market are much the same, but due to the weak glass off-season market last year, the glass edging machine has also been further developed.

Now, let me share with you the details of the purchase of the edging machine, where should I start to observe and review whether the edging machine is of reliable quality.

First of all, let us review the basic structure of the edging machine. The main engine, the inlet and outlet end guide rail, the glass support frame, and the floor-to-ceiling water tank are all its basic components.The main engine can be divided into front beam, rear beam, base, column, motor, electric box, grinding wheel and water tank.

In this way, it is very clear where the quality inspection of the second-hand edging machine should start before purchase.The standard quality requirements require that the front and rear girders must be flat, and that they must have wear-resistant, heat-resistant and oxidation-resistant properties so that the second-hand edging machine will not deform during high-temperature work.Moreover, as the load-bearing place of the edging machine, the base also needs to have the same performance as the front and rear girders to ensure the quality of glass edging.At the same time, second-hand edging machines have higher requirements for grinding heads, and the quality of grinding heads directly affects the quality of glass after deep processing.

After years of experience in maintenance and maintenance, when purchasing a second-hand edging machine, special attention needs to be paid to the various parts, especially the parts with extremely high wear-resistant and oxygen-resistant properties need to be cast parts, and the steel properties of the welded parts need to be particularly good, so that the second-hand edging machine will not have major failures during long-term use, and there will be no separation or loosening of parts.

Finally, what needs to be paid special attention to is the motor.A motor with high shaft runout accuracy and strong waterproof ability can better ensure the quality of glass deep processing.The thickness of the motor grinding plate and the quality of the motor itself are bundled effects. The cost of the thick grinding plate is much higher than that of the thin plate, so attention needs to be paid to inspection.It is recommended to choose a motor made of copper wire, with better bearings and high waterproof performance.