Rock slab processing: the process of changing from a rock slab to a piece of furniture

Ceramic rock slab is made of natural raw materials through a special process, pressed by a press of more than 10,000 tons (more than 15,000 tons), combined with advanced production technology, and fired at a high temperature above 1200℃. As a modern new type of material, it is suitable for cabinets, furniture, floors, walls, building facades and other fields.It is not only green and environmentally friendly, but also has the advantages of wear resistance and high temperature resistance, anti-penetration and anti-skid, and excellent quality, so that the physical properties of the rock slab are much greater than its appearance.The above many advantages make it a popular new material on the market.

So, today, let us explain in detail how to make finished furniture from a piece of ceramic rock slab, which requires multiple processing processes.：

1. Rock slab cutting

Large-scale rock slab processing can be cut at will with the help of a waterjet cutting machine. Waterjet cutting technology is a multi-purpose and modern cutting technology with perfect performance. During the cutting process, it can achieve the characteristics of no thermal deformation, flat incision, and reduced material waste. The incision of the cut rock slab is flat and smooth.

2. Rock slab opening

During the processing of rock slab dining tables, rock slab wash basins, and rock slab bathroom cabinets, holes need to be made on the surface of the rock slab. With the help of professional tools, large rock slabs can be made of any hole type such as square holes and round holes.Complex holes can be made with the help of CNC or waterjet processing equipment.Whether it is a square hole or a round hole in the rock slab, it is necessary to leave an arc of 3 to 5 millimeters in the hole. In addition to being beautiful, the rounded corners can increase the bearing capacity of the panel. Any inner corner of the hole without rounded corners will cause stress points on the panel.

3. Rock slab bonding

In complex applications, if it is not possible to cut and form directly on a piece of sheet, it may be necessary to bond the rock sheet.The bonding of rock slabs requires the use of professional adhesives. Mix the tap water and the bonding in a 1:4 ratio. Stir up the evenly stirred adhesive with a batch ash knife and turn it upside down. The adhesive falls from the batch ash knife in about 5 seconds. At this time, the viscosity of the adhesive is good.The adhesive needs to be allowed to stand for 5-10 minutes after it is prepared.The thickness of the adhesive depends on the size of the surface material.

4. Rock slab polishing

Edging and chamfering is a process with high technical requirements. With the help of professional equipment for edging and chamfering, it can be achieved without chipping and the incision is straight.Chamfering and edging processing not only make the rock slab more beautiful, but also remove burrs and increase the safety of the finished rock slab.

After the above multiple production processes, the processing of rock slab furniture has basically been completed.