Daily Maintenance and Common Fault Handling of Glass Drilling Machines

The equipment adheres to the daily cleaning, weekly inspection, and monthly maintenance system: daily cleaning of the slag collection box with glass debris, checking the water quality and waterway of the cooling water tank, adding lubricating oil for the guide rail, and checking for water leakage at the sealing joint of the main shaft; weekly calibration of the flatness of the fixture, the coaxiality of the main shaft, and grinding of worn diamond drill heads, and tightening the machine frame bolts. The most common production faults are mostly hole edge cracking, mainly due to excessive feed pressure, dull drill heads, and insufficient cooling. Slowing down the feed during the drilling penetration can improve the situation. Main shaft vibration is mostly caused by loose clamping heads and lack of oil in the guide rail. Shutting down the machine for tightening and maintenance. Operators must wear safety goggles and cut-resistant gloves to prevent glass debris from splashing and injuring people. Standard maintenance can reduce the product damage rate by 60% and extend the lifespan of the drill heads.